传统的蒸汽压机复合LVT地板生产线，由于需要采用锅炉加热产生蒸汽进行长时间的模压而成，不仅能耗大，还需要大量人员操作，造成生产效率低下，同时机器所占场地大，操作繁琐。

全新复合结构的LVT软质复合地板生产线是突破一系列技术难关研发出来的，该生产线填补了国内市场的空白，可完全取代传统的蒸汽模压复合工艺。

生产线具有以下优点：

       1、占用场地小

       2、操作简单便捷

       3、生产效率高

       4、更换产品快，可在任意花色间切换

       5、生产成本低

LVT软质复合地板生产线是常州金纬挤出机械制造有限公司不断创新改进的产品，可以替代传统层压机的生产方式，该生产线可实现在线复合，在线压花，在线回火等功能，生产线具有占用场地小，生产效率高，操作简便等特点。

The traditional steam press compound LVT floor production line, due to the need to use boiler heating to produce steam for long time die pressure, not only energy consumption, but also a large number of personnel operation, resulting in low production efficiency, at the same time the machine occupies a large site, operation tedious.

The new composite structure of LVT soft composite floor production line is developed through a series of technical difficulties. The production line fills the gap in the domestic market, and can completely replace the traditional steam molding compound process.

The production line has the following advantages:

1. Small occupancy of the site

2. The operation is simple and convenient

3. High production efficiency

4. Change the product quickly, can switch between any color and color

5. Low production cost

LVT soft composite floor production line is a continuous innovation and improvement product of Changzhou golden weft sheet plate Equipment Manufacturing Company. It can replace the traditional layer press production method. The production line can achieve online composite, online embossing, online tempering and other functions. The production line has the characteristics of small occupancy, high production efficiency, easy operation and so on.

1. 在线挤出生产线：

1.1 挤出机：SJZ80/156（电机功率75KW）

1.2生产线挤出产量：2600平方/天  

1. online extrusion line:

1.1 extruder: SJZ80/156 (motor power 75KW)

1.2 production line extrusion output: 2600 square per day

2. 模具：

2.1 模具采用阻流棒控制形式，可快速调节出料均匀

2.3上下模唇可微调，更好的控制产品厚度

2. mold:

2.1 the mould adopts the control rod of choke rod, which can adjust the discharging evenly.

2.3 upper and lower die lip can be fine-tuned to better control product thickness

3. 六辊复合成型机：Six-roller composite forming machine:

3.1 采用段复合设计，可以减少表面贴合材料的拉伸

3.2 创新的加热过渡辊设计，可确保较厚耐磨层的复合强度

3.3 压花辊的安装设计，压花效果好，更换花辊更方便

3. six roll compound molding machine

3.1 the use of segmental composite design can reduce the tensile strength of surface bonding materials.

3.2 the innovative heating transition roller design ensures the composite strength of the thicker wear-resistant layer.

3.3 the design of the embossing roller is good, and the embossing effect is good. It is more convenient to change the flower roller.

4. 回火及吸水牵引机

4.1 通过在线回火设计，可有效控制产品的平整度及收缩率

4.2 吸水牵引机可有效去除制品表面的水份

4. tempering and water absorbing tractor

4.1 by online tempering design, the flatness and shrinkage of products can be effectively controlled.

4.2 Water-absorbing tractor can effectively remove moisture from the surface of products

5. 自动定长剪板机Automatic length fixing cutter.

5.1 剪板机入口带辅助牵引设计，可更好控制剪板的稳定性

5.2 特殊的切割设计，可以***大限度的减少产品端面的毛边

5.3 产品的自动定长功能，方便人员操作，切割精度高

5. automatic fixed length shearing machine

5.1 the design of the auxiliary belt of the guillotine belt can better control the stability of the shear plate.

5.2 special cutting design can minimize the edge of the product.

5.3 the automatic length fixing function of the product is convenient for people to operate, and the cutting accuracy is high.

备注：以上规格参数如有变更，恕不另行通知。Note:The specifications are subject to  change without prior notice